Does the 50 series radio requires the same circuitry for the reset pin that the SSD30 series radio does?

Answer

Does the 50 series radio requires the same circuitry for the reset pin that the SSD30 series radio does? The circuit in question is shown below which is also on page 14 of the hardware integration guide.  Since the SSD50 hardware integration guide doesn?t mention it, Assuming this type of circuitry is no longer necessary or is taken care of internally. SYS_RST_L is not implemented on the 50 series; the only reset lines you need to be concerned with are WLAN_PWD_L and BT_PWD_L. Both lines require 10k pull up resistors. We recommend reviewing the datasheet for timing requirements.