How do I enable DCDC on the BL600(v1.8.88.0) in smartBasic?

BL600-07, which has the latest chip (Nordic HW Variant: nRF51822-QFAA-H0) and firmware (Firmware v1.8.88.0), that the DCDC is not enabled by default. Note: in older modules -06 and older, the DCDC is always forced OFF because Nordic advised us that there was a hardware level issue which got fixed in the latest chip which we deploy in the -07 To enable DCDC the smartBASIC application should have the following line: BleConfigDcDc( 1 ) It is safe to have this line even in older modules because based on the variant at runtime I will force to OFF if it is an older chip.