How to connect to the IG60 serial console.

Sentrius IG60-BL654 and IG60-BL654-LTE Wireless IoT Gateway

Answer

You can use the USB of IG60 for a serial interface. This is particularly useful when connection to the gateway can be lost, such as configuring network settings.

The following hardware is required:

1x Serial Null Modem Cable - DB-9 (F) to DB-9 (F)




2x USB to Serial RS232 Adapter Cables



To connect:

  • Connect the three cables together. 
  • Insert one USB end to the IG60 and the other to your workstation.  
  • On the workstation open a terminal emulator.
  • Enter the COM (serial interface) port that coincides with the serial interface to the IG60.
  • Configure the connection Baud Rate 115200.
  • Start the connection, the root password is "summit"