Does the Vela IF820 EZ-Serial support flow control?

Vela IF820453-00171R453-00171C453-00171-K1453-00172R453-00172C453-00172-K1

Answer

Yes, the Vela IF820 does support flow control but it is not enabled by default.

The default UART settings are

  • 115200 baud
  • 8 data bits
  • no parity
  • 1 stop bit
  • no flow control

The UART settings can be changed using the system_set_uart_parameters command (stu)

The UART settings can be read using the system_get_uart_parameters command (gtu)