RM024

Table of Contents

  1. Datasheet
  2. Product Brief
  3. Documentation
  4. Application Note
  5. Software
  6. Certification
  7. FAQs
RM024-S125-C-30RM024-P125-M-30DVK-RM024-CERM024-S10-C-30DVK-RM024-FCCRM024-S10-M-30RM024-P10-M-30RM024-S125-M-30RM024-P125-C-30RM024-P10-C-30

Datasheet

Product Brief

Documentation

Application Note

Software

Certification

FAQs

Does the RM024 or LT1110 support encryption, if so which encryption protocol is supported?Jul 2023
How many transmit retries should I use in my application and what is the cost associated with more retires?Nov 2024
What is the default UART baud rate for RAMP modules?Nov 2024
Should I used Broadcast mode or Addressed Mode?Nov 2024
With Ezurio RAMP radios, (CL4490/AC4490, CL4790/AC4790, LT1110, RM024) can I implement a design using just TX, RX and Gnd (three-wire interface) for UART?Jul 2024
I am able to test with the Development Kit hardware or ConnexLink Unit connected to my PC, but it does not work in my actual application, why not?Dec 2021
Are your RAMP radios (AC4490/CL4490, AC4790/CL4790, RM024, LT1110) UL Certified for applications in C1D2 Environments?Dec 2021
Can the firmware be updated on the AC4490/CL4490 or AC4790/CL4790 in the field?Dec 2021
I am not achieving the range documented in your manual, why not?Dec 2021
What is Sync-to-Channel and do I need it?Dec 2021
On the RAMP radios, what is the difference between "Broadcast Attempts" and "Max Transmission Retires"?Dec 2021
How do I return my ConnexLink Radio, AC4490/AC4790, RM024, LT1110 radio to its default settings, can I use Show Defaults?Nov 2024
Which Antennas can be used with the CL4490, CL4790, AC4490, AC4790, RM024, or LT1110?Dec 2021
How do I return my ConnexLink Radio, AC4490/AC4790, RM024, LT1110 radio to its default settings?Nov 2021
Can I choose an RF Channel that is outside of Wi-Fi interference on the RAMP radios?Nov 2024
Can I get true full duplex operation from the RAMP products (RM024, AC4490, AC4790, LT1110, CL4490, CL4790)?Apr 2021
Do any of the RAMP products support XON-XOFF?Jul 2020
What does the “Disable Drivers” header on the RM024 DVK do and what is it used for?Feb 2019
Why is my RM024 client module pulling an average of 35-40mA when the server is not powered on but drops to around 10mA when I turn the server on?Feb 2019
How many volts does the RM024 need in order to operate?Feb 2019
I am not getting the expected range from a U.FL-only RM024. Why?Feb 2019
I have TX API/RX API enabled on my RM024/AC4490/AC4790/CL4490/CL4790 and I'm seeing errors when I run the Range Test, why?May 2017